|
|
.JPG) |
|
.JPG "I found a forum where other folks..."){kind=small}
.JPG "First I tried softening the plastic..."){kind=small}
.JPG "Back tracking a bit, I have to say..."){kind=small}
.JPG "Over the past 32 years, I've replaced..."){kind=small}
.JPG "The inner tube had to wrap three..."){kind=small}
.JPG "Bent it up on the bench vise by hand."){kind=small}
.JPG "Although the Agi-Tamer..."){kind=small}
.JPG "Tapered the ends in just a bit, to..."){kind=small}
.JPG "I gave it a go with my wimpy Harbor..."){kind=small}
.JPG "So I laid aside the slide hammer, and..."){kind=small}
| I began looking at how best to grab the agitator with a slide hammer. This piece of bar stock (painted John Deere green) looked right. | |
| Total images: 27 | Last update: 7/21/10 4:53 PM | Help | |
|
|
|
|
| I began looking at how best to grab the agitator with a slide hammer. This piece of bar stock (painted John Deere green) looked right. | |
| Total images: 27 | Last update: 7/21/10 4:53 PM | Help | |